How do I connect my Guardian™ transmitter to my MiniMed™ 700 series pump?
To pair the pump and transmitter:
Attach the transmitter to the charger. Fully charge the transmitter. Keep the transmitter attached to the charger. Note: Both lights on the charger are off when the transmitter is fully charged
From the Home screen, press the Select button, and then select Paired Devices.
Place the transmitter (still attached to the charger) next to the pump.
Select Pair New Device. The Searching... screen appears. Note: The search process can take up to two minutes. During the search process, pump screens are not available, and the pump cannot be suspended.
Remove the transmitter from the charger. The transmitter light flashes 10 times and turns off. The Select Device screen appears with a list of available devices.
Select the CGM device that matches the serial number indicated on the back of the transmitter.
If the transmitter serial number on the pump screen matches the serial number on the back of the transmitter, select Confirm